航天器型号AIT生产管理模式探讨

为解决航天型号任务激增给AIT生产管理体系带来的问题,文章结合当前开展精细化管理工作的要求,与国外先进宇航公司——泰雷兹-阿莱尼亚空间公司就组织机构、科研生产管理、系统级研发及生产能力提升、生产流程进行对标,提出了业务整合、流程再造、优化管理模式的解决措施,探索具有中国航天特色的型号AIT生产管理模式。     

激光跟踪仪在交会对接微波雷达多径试验中的应用

交会对接微波雷达多径试验是在地面模拟两个飞行器在轨交会对接过程中由舱体表面及遮挡对微波信号造成反射干扰的一种试验,其目的是验证激光雷达系统功能及安装位置的合理性。在近20 m远的距离上,对飞行器舱体上的微波雷达天线和微波应答天线进行角度及距离的精确测量。文章通过对试验环境、测量项目分析及不同精测方案比对,采用激光跟踪仪直接测量舱体结构,获得了准确的基准数据,有助于指导微波雷达在飞船轨道舱上的精确安装和提高交会对接微波雷达多径试验的精度。激光跟踪仪首次应用于交会对接微波雷达多径试验,相比经纬仪在航天器基准测量中具有更大的优势。     

高超声速气流非结构化网格DSMC算法研究

高超声速气动热力学环境的研究是直接涉及飞行器轨道控制、热防护设计的关键问题之一。文章通过研究稀薄气体热化学非平衡态中的热力学环境,采用非结构化DSMC程序对“火星探路者号”（Mars Pathfinder）探测器的Ballute减速装置在地球大气层和火星大气层中的高超声速飞行进行了数值模拟,计算得到了流场的温度分布、探测器壁面的热流密度分布,分析表明稀薄气体热化学非平衡态对飞行器流场有影响。将仿真结果与NASA兰利研究中心的计算结果作了比较,二者吻合很好。研究结果可用于飞行器热防护设计。     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

Evaluation method for helicopter maritime search and rescue response plan with uncertainty

Helicopter plays an increasingly significant role in Maritime Search and Rescue (MSAR), and it will perform MSAR mission based on response plans when an accident occurs. Thus the rationality of response plan determines the success of MSAR mission to a large extent. However, with the impact of many uncertainty factors, it is difficult to evaluate response plans comprehensively before performing them. Aiming at these problems, an evaluation framework of helicopter MSAR response plan named UMAD is proposed in this paper, which reveals the influence mechanism of uncertainty factors based on Multi-Agent method and analyzes the mission flow based on Discrete Event System (DEVS) method. Furthermore, the evaluation criterion and indicators of response plan are extracted from the aspects of safety and effectiveness. Meanwhile, the Monte Carlo method is adapted to calculate the probability distribution and robustness of response plan comprehensive result. Finally, in order to illustrate the validity of this method, it is discussed and verified by an application example of evaluating multiple response plans to the same MSAR scenario. The results show that this method can analyze the influence of uncertainty more systematically and optimize response plans more comprehensively.     

NEPE推进剂/衬层结构-性能MD模拟（Ⅱ）--复杂体系组分分子迁移和配方设计示例

用分子动力学( MD)方法,对( PEG/NG/BTTN)/NPBA/HMX/AP/PEG/N-100//HTPB/TDI复杂的推进剂/衬层模型体系进行295 K-NVT模拟研究,展示了组分分子的浓度分布和迁移状况,发现HMX和NPBA分子有向界面层迁移趋势,而AP则呈平均分布态势。以RDX等量取代HMX后所得新配方的MD模拟研究表明,前者拉伸模量( E)、体模量( K)和剪切模量( G)、柯西压( C12-C44)和K/G值均有明显下降,表明新配方的刚性、强度和延展性均有下降;新配方中引发键(N—NO2)最大键长(1.528?)明显大于原配方中相应值(1.503?),预示新配方感度增大、安全性将下降;比较RDX、HMX与其他组分之间的结合能,前者小于后者,预示新配方的相容性较差。     

复合喷管结构温度场流固耦合仿真分析

为了评估复合喷管热防护性能以及获取喷管烧蚀和结构应力分析的工况条件,运用Fluent流体动力学软件,对复合喷管的结构温度场进行了数值仿真。分析中,采用了两方程RNG k?ω湍流模型和增强型壁面函数,利用流固耦合的计算方法,获得了喷管结构瞬态温度场的计算结果,重点分析了结构温度场最终分布状态和初期传播特点,以及喉衬温度随时间的变化规律,估算了喉衬的烧蚀。分析结果表明,喷管结构热防护性能满足要求,温度最高区域位于喷管收敛段中后部,喉衬线烧蚀量约为2．1 mm,为喷管结构进一步优化设计提供了重要参考依据。     

粉末火箭发动机燃烧室燃烧流动特性研究

选取颗粒轨道模型,对Al／AP粉末颗粒在粉末火箭发动机内流动和燃烧进行三维数值模拟,为以Al粉末燃料和AP粉末氧化剂作为推进剂的新型燃烧室的设计以及实验研究提供参考。文中提出了一种粉末火箭发动机构型,通过对发动机燃烧室进行冷态和热态数值模拟,研究了氧燃比、Al粉末颗粒大小、燃烧室体积等因素对粉末火箭发动机燃烧室燃烧性能的影响。结果表明,一定范围内氧燃比较高时,燃烧室温度反而较低;较小粉末颗粒在燃烧室内更易离散;Al颗粒粒径越小越易燃烧,Al燃烧率也越高;验证了在Al／AP粉末火箭发动机的设计中引入特征长度来匹配Al粉粒径与燃烧室体积的合理性。     

航天器自主交会对接的高精度目标定位方法

根据航天器自主式交会对接的实际应用背景和技术需求,针对交会对接过程中所要求的高精度、实时性和强抗扰的技术指标,在合作目标特性分析的基础上,将高斯曲面拟合与双线性插值相结合,提出了一种高精度的合作目标定位方法。首先根据目标图像的灰度分布进行双线性插值和高斯曲面拟合,在此过程中可同时利用目标原有像素和插值点的亚像素信息,使拟合曲面各幅值点的坐标精度达到亚像素级,以确定目标的中心位置。仿真图像和实拍图像的试验结果表明,此定位方法具有亚像素级的定位精度,其总体定位误差可达到1/20个像素左右,并能满足实时性要求,可以在航天器交会对接与空间遥操作等方面的应用中发挥重要作用。     

运载火箭姿控对迭代制导适应性分析的仿真方法研究

首先给出了迭代制导方法,然后建立了姿态动力学全量数学模型,在考虑弹性振动和液体晃动的情况下,进行了制导与姿控系统的六自由度联合仿真.仿真结果表明,在迭代制导实时优化输出程序角的情况下,姿控系统具有良好的跟踪性能;在制导与姿控子系统相互作用的情况下,能够确保制导程序角的收敛和姿态的稳定.